web
analytics
Request-a-Quote

Cleanroom Consulting - Cleanroom Design - Dryroom Consulting

Experts in the Areas of Cleanroom Design, Clean Room Engineering, Cleanroom Consulting, Turnkey Construction

Cleanroom Design

Clean Air Technology can prepare the needed wealth of information specific to designing thru certification of your cleanroom.

Our design team can provide AutoCAD cleanroom design services for most cleanroom projects for architectural, structural, mechanical and electrical disciplines. A thorough inspection of the proposed job site is usually required and includes field measurements, identifying column locations, photographs of the important items and interferences, items to be scheduled for demolition and discussing the total CAD requirements directly with the customer. The number of personnel making the on-site inspections and the number of trips required is determined by the size, duration and phases of the project. Other topics covered by our cleanroom designers include: international design standards, the economics of cleanroom design, high efficiency air filtration, materials used in cleanroom construction, and the provision of clean gases and water.

The design drawings resulting from this process can also be reviewed and sealed by CAT's staff professional cleanroom engineers, registered in the particular state the project is in. The drawings are then ready to be submitted to the local building and code authority for approval and permits. CAT stands ready to make the cleanroom design process a success given any cleanroom requirement.

Our cleanroom design experience is broad based including FDA validatable multi-user/multi-product facilities; medical, pharmaceutical, microbial/cell culture, gene therapy, and health sciences facilities; aseptic filling, medical device, semiconductor, electronic, optics, military/aerospace, and manufacturing cleanrooms.

Consulting

Cleanroom Engineering

Clean Air Technology Inc. is a design and build cleanroom manufacturer and construction contractor. We provide design services, evaluations, expansions and upgrades of new or existing cleanrooms. Our company specializes in the engineering of mechanical / HVAC, ductwork, piping, insulation and controls. Staff cleanroom engineers can provide reviewed and sealed P.E. plans and specifications for structural, mechanical, and electrical disciplines for the particular state that the job-site is located in. CAT's cleanroom engineering support is a crucial step to ensure that any cleanroom project is built to attain the highest cost/value ratio.

Cleanroom Consulting

CAT's stand alone or integrated cleanroom consultant services are offered drawing on over 40 years of hands-on, proven experience in the cleanroom design and construction and BSL bio-safety/bio-containment facilities. Our team of cleanroom consultants will advise in evaluation and recommendations for short range, medium term and long-term design objectives and improvements. Some aspects of our cleanroom consulting services include:

  • Document review of plans and specifications helping to correct errors during cleanroom design and engineering before its actual construction
  • Building commissioning services to ensure that the facility is functioning as it was intended in the cleanroom design phase and initial requirements

Clean Room Design, Evaluations, Upgrades and Expansions

Cleanroom consultant services are offered on a one time fee basis or as several visits over time for a specific clean room project. With successful completion of over 1000 cleanroom projects, CAT brings an unparalleled consultant experience level to your company and to your personnel requiring specific advice and recommendations.

HVAC Design and Upgrades of Your Existing Cleanroom

CAT provides complete design and consulting in cleanroom mechanical systems and is capable of analyzing, modifying, and retrofitting existing cleanroom systems.

Close-Tolerance Temperature & Humidity Control

We specialize in the design, consulting, and building of close-tolerance temperature and humidity cleanroom systems. We look forward to the challenges that our customers bring us.

Biohazard Level P-3 Cleanrooms

Our cleanroom consultant assistance is provided for design and construction of BSL P-2 & P-3 bio-hazard cleanrooms for medical research and production, military applications and related requirements.

Negative Air Pressure Clean Laboratories

Design of negative air pressure cleanrooms for hazardous processes are supported at Clean Air Technology. CAT has considerable experience as a designer and builder of these types of cleanroom facilities.

Portable/Mobile Cleanrooms and P-3 Bio-Containment Clean Laboratories

In addition to the fixed modular facilities, our cleanroom consulting is available for design of portable/mobile, positive air pressure cleanrooms, as well as negative air pressure bio-hazard/containment labs.

Upgrades and Modifications as a Cleanroom Contractor

Evaluation, design and/or upgrades to an existing cleanroom design can also be provided on a contract basis, direct to your company, or as a sub-contractor to your architectural and engineering firm or general contractor. This service is available when the A & E firm is responsible for the building fit-out or for the complete building and the cleanroom is part of this contract. Further, CAT can manufacturer, supply, and install all components necessary for the complete turn-key cleanroom construction or, in the case of upgrade modifications - repair, replace, and install all required cleanroom components in place of the original equipment. This focus will help ensure its passage in the cleanroom audit and certification phases.

Cleanroom Fabrication, Cleanroom Installation

Cleanrooms Created from Decades of Experience